Designing
Your System
The uniqueness of Flaming River is that we have the designed a
complete steering system... from rack and opinion or steering box
through the universal joints to the tilt column and even the
steering wheel.
 |
|
|
Here is a worksheet to help you in ordering:
- Year of your vehicle?___________
- Do you prefer our sleek 1 3/4" diameter column (usually
preferred for a new build) or are you replacing an existing 2"
diameter column?___________
- Do you are for the attractive shine of our stainless column for
a column which you can paint to match the interior:(Tip: the cost is
almost the same once you take into account paint and your time)
___________
- Would you like a dimmer switch on the column? would you like
this on the tilt lever (if adding cruise) or on the turn
signal?_________
- What length column drop? (measure from the bottom of the dash
to the center of the column tube 2 1/2, 3 1/2, 5 1/2 or 6 1/2) Specify
2" or 1 3/4________
(Tip - we'll be happy to exchange this for you if you need to change
the length before installing it)
- Would you like our swivel floor mount?
FR20100/FR20101. a cover for the inch inside of the mount is also
available._________
- Will your steering system require two or three u-joints? (the
angle decides this. - if it is more than 30 degrees, you will need to
add a third u-joint and support bearing.)________
- What type of steering rack or box are you using?_________
- Have you with selected eight steering wheel to use with the
system (wood or leather) __________
do you need an adapter?__________
- Do you need an ignition key/boot kit?_________
- For a gearshift column, it is very important to use a neutral
safety switch. We offer this on the column - FRNSS or as a
transmission kit. FR20111NS which would you prefer?__________
- Do you have a transmission with over drive?_________
|
|
